Garda 6m x 5m (23.1m²) Hexagonal Enclosed Gazebo Kit - Grey Structure & Hybrid Panels
Size
More space means more time spent outside with your favorite people (even if that means spending some quality time with yourself). The Garda is an extra-large enclosed gazebo to immerse yourself in the beauty of the outdoors from the comfort of the indoors. With a sliding door on each one of the six sides, the option to add screen door kits for every door, and effective heat retention, this garden structure is designed as a spacious outdoor room for every season, no matter the weather.
Supplied as an all-inclusive kit, the DIY gazebo can be used for indoor/outdoor dining, a beautiful place to hold your parties, a man cave, or as your very own private outdoor spa as a hot tub enclosure. In one weekend, you can add value to your home and still have plenty of time to sit back and enjoy your beautiful new solarium.
- Virtually unbreakable, 16 mm multi-wall polycarbonate roof panels
- Treated grey tinted glazing -transmits natural sunlight on overcast cloudy days yet provides sufficient shading
- Panels maintain their integrity, provide complete UV blockage, and are 100% UV protected; they do not discolour, fracture, or become brittle over time
- High impact, crystal-clear acrylic wall panels, naturally resistant to harmful UV rays
- The high impact, the transparent acrylic wall system is resilient, easy to clean, maintains high light transmission, and perfectly integrates with any home design and outdoor environment
- Granulated anthracite powder-coated frame is made of heavy-duty aluminium profiles and laser cut galvanized steel connectors
- Provides a highly durable, rust resistant& extra-rigid structure
- Simple 2 person DIY assembly –sliding panels’ assembly system, ready to assemble pre-cut panelsandpre-drilled profiles; all screws included
- Six wide double sliding pre-assembled doors, for ideal airflow and passage
- Lockable doors -lock with a master key
- Elegant top vent detail allows airflow and smoke relief
- Built-in gutter system for water drainage & collection
- Technical information, including dimensions, panel thickness, and wind and snow load, can be found in the photo gallery above.
Model: #704467
Dimensions
| A | Length | 595cm | 19'6"ft |
| B | Width | 517cm | 17'ft |
| C | Height | 332cm | 10'11"ft |
Product Details
Gazebo Accessories
Check out our certified Canopia accessories
Garda Gutter & gutter heads
Integrated gutter and gutter heads allow you to easily channel and collect rainwater for a sustainable irrigation system
Ledro & Garda Aluminium Structure
Granulated anthracite powder-coated frame is made of heavy duty aluminium profiles and laser cut galvanized steel connectors Provides a highly durable, rust resistant & extra rigid structure Ready to assemble pre-drilled profiles Simple 2 person DIY assembly sliding panels assembly system, ready to assemble pre-drilled profiles; all screws includedFAQ
Solutions:
- Avoid drying clothes inside.
- Improve ventilation (trickle vents, open windows).
- Close doors to humid areas (kitchen).
- Use dehumidifiers or extractor fans.
- Maintain a consistent temperature (around 18°C).
- Wipe down condensation regularly.
- Choose moisture-absorbing plants (Orchids, Peace Lilies, Spider Plants).
It is the consumer's responsibility to ensure all planning requirements are met.
You might not need planning permission for a garden structure or building if it qualifies as permitted development. However, it's essential to check with your local planning authority before starting any work.
When Planning Permission is Usually Required:
- If the structure or building covers more than 50% of the area surrounding your house.
- If the structure or building is located on the front or side of your house that faces the road.
- If the structure or building is in a conservation area and is more than one story high.
- If the structure or building is higher than the highest part of your house's roof.
- The structure or building is located at the rear of your home.
- The eaves of the structure or building are less than three meters high, especially if it's less than two meters from a boundary.
- The eaves of the structure or building are lower than the highest part of your home.
It is necessary to have it anchored as per the instructions, Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
Yes, you can definitely use a heater inside the closed gazebo. Make sure you follow the manufacturer’s safety instructions. Using a heater will allow retention of heat, a suitable heater by Palram can be found online.
Yes, the Sun Room’s door can be placed on either side. There are no available screens for the Sun Room. The door swings outward.
No, it is not an option, it cannot be performed.
Yes, it can be anchored to concrete. Base or foundation must be flattened, leveled and prepped prior to installing the product. The product must be built on a solid level surface in order to perform properly.
We recommend using concrete or wood deck as base. In addition, It is imperative that the ground surface be perfectly flat and leveled and in a 90° angle to the supporting wall.
The structure can support a ceiling fan hanging from it, it can be installed using the beam’s built-in tracks. Please make sure you install the fan and the wiring in a secure way, you may consult with a handyman as to how to attach it to the top.
I am assuming you are referring to a stationary RV. If this is the case, you need to make sure the RV’s size is suitable to the requirements. You will need to find the compatible screws and plugs in order to attach the SanRemo to the RV. In addition the SanRemo requires a solid foundation such as concrete, asphalt etc. and the back is supposed to be attached to a structure wall (such as a house’s wall). Should you attach it to a vehicle; the lower part (where the wheels are) will remain open.
The SanRemo can be installed on a deck and attached to a house with vinyl sidings. Please consult with an expert / constructor with regards to the screws and plugs you should use for your specific wall type and trex deck.
Assembly guide
Assembly instructions & Certificates for Downloads
Foundation
A
Prepare the site
The product must be built on a solid an Levelled surface in order to perform properly.
1 - Clear the site
2 - Level the ground
Important
We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.
B
Choose your foundation type
Option 3: Solid ground / Asphalt
a + b + c – 40 cm / 1’4″
Rating and Reviews
Rating Breakdown
Customer Reviews (0)
There are no reviews yet.